ASTM D1709

Материалы для подачи заявления

ASTM D1709 is used to assess the impact resistance of plastic films, which are commonly used in packaging, agriculture, construction, and various consumer products. These materials include polyethylene, polypropylene, and other flexible plastic films.

Процесс тестирования

1. Подготовка образца: Plastic film samples are prepared according to the specified dimensions and conditioning requirements.
2. Dart Selection: A hemispherical dart (tup) is selected based on the expected impact resistance of the film.
3. Испытательная аппаратура: The dart is dropped from a specified height onto the film sample clamped over a circular opening.
4. Impact Test: The dart is released to fall freely onto the film. The test can be performed using two methods:
   • Метод А: The dart (diameter = 38±1mm) is dropped from a height of 660mm.
   • Метод Б: The dart (diameter = 50±1mm) is dropped from a height of 1500mm.
5. Observation: The test is conducted until a failure point is reached, where the film ruptures due to the impact.

Интерпретация результатов теста

• Failure Point: The result is recorded as the weight of the dart at which 50% of the samples fail (break or puncture). This is often referred to as the “impact failure weight” or “dart drop impact strength.”
• Statistical Analysis: The results can be statistically analyzed to determine the mean and standard deviation of the failure points, providing a measure of the film’s impact resistance.

Тест Значимости

• Material Performance: The test determines the ability of plastic films to withstand impact forces, which is crucial for applications where the films are subjected to rough handling or mechanical stress.
• Контроль качества: The results help manufacturers ensure consistent quality and performance of plastic films.
• Product Development: The test aids in the development of new films with improved impact resistance properties.

Требования к инструментам

• Dart Assembly: A hemispherical dart with a specific weight and diameter.
• Drop Height Apparatus: A mechanism to release the dart from a controlled height.
• Sample Clamping Device: A device to securely hold the film sample over a circular opening without slippage.
• Измерение Tools: Instruments to measure the weight of the dart and the height of the drop accurately.

Меры предосторожности

• Safety Measures: Proper safety measures should be in place to protect operators from the falling dart and any debris from film breakage.
• Sample Conditioning: Samples should be conditioned according to specified environmental conditions to ensure consistent results.
• Калибровка: The testing apparatus should be regularly calibrated to maintain accuracy.
• Proper Handling: Care should be taken to handle and prepare samples without introducing defects or stress that could affect the results.

By following these guidelines, ASTM D1709 ensures reliable and reproducible testing of the impact resistance of plastic films.